Home / GPU ladder / RTX 2080 Ti 11GB
RTX 2080 Ti 11GB for MiniMax H3: Speed, VRAM & Recommended Setup
| Size (16:9) | 5s | 8s | 10s | 15s |
|---|---|---|---|---|
| 416 × 256 0.1MP · flicker-prone | 1 min 54 s VRAM 10G | 2 min 17 s VRAM 10G | 2 min 33 s VRAM 10G | 3 min 16 s VRAM 10G |
| 864 × 480 0.4MP | 3 min 55 s VRAM 10G | 5 min 56 s VRAM 10G | 7 min 41 s VRAM 10G | 13 min 17 s VRAM 10G |
| 960 × 544 0.5MP | 4 min 45 s VRAM 10G | 7 min 46 s VRAM 10G | 10 min 22 s VRAM 10G | 18 min 59 s VRAM 10G |
| 1152 × 640 0.7MP | 6 min 44 s VRAM 10G | 12 min 20 s VRAM 10G | 17 min 15 s VRAM 10G | 34 min 33 s VRAM 10G |
| 1344 × 768 1.0MP · official max | 10 min 19 s VRAM 10G | 20 min 50 s VRAM 10G | 30 min 34 s VRAM 10G | 1.1 h VRAM 10G |
| 1376 × 768 1.0MP · above native | 10 min 40 s VRAM 10G | 21 min 40 s VRAM 10G | 31 min 55 s VRAM 10G | 1.2 h VRAM 10G |
| 1920 × 1088 2.0MP · above native | 31 min 57 s VRAM 10G | 1.3 h VRAM 10G | ✕ 2.1 h VRAM 10G | ✕ 5.5 h VRAM 10G |
Times are per whole clip (model load and text encoding included); the first run is slower due to kernel compilation. ⚠ = weight offloading / noticeably slower; ✕ = not recommended.
Reading the numbers
With the recommended combo, the green (no disk spill) ceiling is 1920 × 1088 · 8s at ~1.3 h per clip. 2 high-end combinations are not recommended (pagefile pressure or >90 min per clip) — see the ✕ marks below. For comfortable 768p: add RAM to 64GB, or move to a card with 16GB+.
Recommended combo (Starter tier (8-10GB VRAM))
- Main model: MiniMax-H3-FL2VA-Pruned-Q3_K_M.gguf（8.9GB）
- Text encoder: qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors（15.69GB）
- Acceleration: LightX2V Turbo 8-step v1.0 · ~2.08× sampling
- Launch flags:
--fast-disk--disable-mmap--lowvram
480-540p 5s; 4-8 steps; 3-10 min per clip; start at 736x416
FAQ
Can the RTX 2080 Ti 11GB run MiniMax H3?
Yes. Estimated with 32GB RAM + fast-disk: 1920×1088·8s at ~1.3 h per clip. Configs that exceed VRAM fall back to weight offloading (slower, but they still render).
How fast is H3 on the RTX 2080 Ti 11GB?
About 1.3 h per 1920×1088·8s clip (including model load and encoding). Longer or denser clips scale quadratically in the attention term.
How much RAM do I need?
At least 32GB of system RAM recommended (minimum 16GB plus a 48GB pagefile). With 32GB, always enable --fast-disk or weights spill into the pagefile.
How can I make it faster?
Stack step distillation (e.g. LightX2V Turbo 8-step v1.0), enable SageAttention / Kitchen attention; for long clips try SLA / VSA sparse attention. All of it is switchable in step 2 of the calculator.
→ Run the numbers for your RAM and budget in the calculator (RTX 2080 Ti 11GB pre-filled)
Same tier: GTX 1050 Ti 4GB · GTX 1060 6GB · GTX 1070 8GB · GTX 1080 8GB · GTX 1080 Ti 11GB · RTX 2060 6GB · RTX 2060 12GB · RTX 2060 Super 8GB
Related: Hardware guide · Acceleration compared · 8GB VRAM setups