GTX 1070 8GB for MiniMax H3: Speed, VRAM & Recommended Setup

8GB GDDR5 · bandwidth 256 GB/s · Pascal · sm_61 · estimated with 32GB RAM / fast-disk · updated 2026-09-28

Verdict: Recommended: 864 × 480 · 15s, ~1.3 h per clip (VRAM peak ~7GB). See the table for higher tiers.

Size (16:9)	5s	8s	10s	15s
416 × 256 0.1MP · flicker-prone	6 min 44 s VRAM 7G	9 min 8 s VRAM 7G	10 min 49 s VRAM 7G	15 min 20 s VRAM 7G
864 × 480 0.4MP	19 min 30 s VRAM 7G	32 min 12 s VRAM 7G	43 min 2 s VRAM 7G	1.3 h VRAM 7G
960 × 544 0.5MP	24 min 45 s VRAM 7G	43 min 32 s VRAM 7G	59 min 38 s VRAM 7G	✕ 1.9 h VRAM 7G
1152 × 640 0.7MP	37 min 7 s VRAM 7G	1.2 h VRAM 7G	✕ 1.7 h VRAM 7G	✕ 3.5 h VRAM 7G
1344 × 768 1.0MP · official max	59 min 22 s VRAM 7G	✕ 2.1 h VRAM 7G	✕ 3.1 h VRAM 7G	✕ 6.9 h VRAM 7G
1376 × 768 1.0MP · above native	1.0 h VRAM 7G	✕ 2.2 h VRAM 7G	✕ 3.2 h VRAM 7G	✕ 7.2 h VRAM 7G
1920 × 1088 2.0MP · above native	✕ 3.2 h VRAM 7G	✕ 8.2 h VRAM 7G	✕ 13.4 h VRAM 7G	✕ 34.6 h VRAM 7G

Times are per whole clip (model load and text encoding included); the first run is slower due to kernel compilation. ⚠ = weight offloading / noticeably slower; ✕ = not recommended.

Reading the numbers

With the recommended combo, the green (no disk spill) ceiling is 864 × 480 · 15s at ~1.3 h per clip. 13 high-end combinations are not recommended (pagefile pressure or >90 min per clip) — see the ✕ marks below. For comfortable 768p: add RAM to 64GB, or move to a card with 16GB+.

Recommended combo (Starter tier (8-10GB VRAM))

Main model: MiniMax-H3-FL2VA-Pruned-Q3_K_M.gguf（8.9GB）
Text encoder: qwen3vl_32b_minimax_h3_nvfp4_awq.safetensors（15.69GB）
Acceleration: LightX2V Turbo 8-step v1.0 · ~2.08× sampling
Launch flags: --fast-disk --disable-mmap --lowvram

480-540p 5s; 4-8 steps; 3-10 min per clip; start at 736x416

With 16GB RAM a ≥48GB pagefile is mandatory; 15s clips are basically unusable

FAQ

Can the GTX 1070 8GB run MiniMax H3?

Yes. Estimated with 32GB RAM + fast-disk: 864×480·15s at ~1.3 h per clip. Configs that exceed VRAM fall back to weight offloading (slower, but they still render).

How fast is H3 on the GTX 1070 8GB?

About 1.3 h per 864×480·15s clip (including model load and encoding). Longer or denser clips scale quadratically in the attention term.

How much RAM do I need?

At least 32GB of system RAM recommended (minimum 16GB plus a 48GB pagefile). With 32GB, always enable --fast-disk or weights spill into the pagefile.

How can I make it faster?

Stack step distillation (e.g. LightX2V Turbo 8-step v1.0), enable SageAttention / Kitchen attention; for long clips try SLA / VSA sparse attention. All of it is switchable in step 2 of the calculator.

→ Run the numbers for your RAM and budget in the calculator (GTX 1070 8GB pre-filled)

Same tier: GTX 1050 Ti 4GB · GTX 1060 6GB · GTX 1080 8GB · GTX 1080 Ti 11GB · RTX 2060 6GB · RTX 2060 12GB · RTX 2060 Super 8GB · RTX 2070 Super 8GB