Home / GPU ladder / Apple M4 Max 128GB (unified memory)
Apple M4 Max 128GB (unified memory) for MiniMax H3: Speed, VRAM & Recommended Setup
| Size (16:9) | 5s | 8s | 10s | 15s |
|---|---|---|---|---|
| 416 × 256 0.1MP · flicker-prone | ✕ 2 min 46 s VRAM 69G | ✕ 3 min 23 s VRAM 69G | ✕ 3 min 51 s VRAM 69G | ✕ 5 min 5 s VRAM 70G |
| 864 × 480 0.4MP | ✕ 6 min 14 s VRAM 70G | ✕ 9 min 56 s VRAM 71G | ✕ 13 min 18 s VRAM 72G | ✕ 24 min 32 s VRAM 74G |
| 960 × 544 0.5MP | ✕ 7 min 44 s VRAM 71G | ✕ 13 min 27 s VRAM 72G | ✕ 18 min 35 s VRAM 73G | ✕ 36 min 22 s VRAM 76G |
| 1152 × 640 0.7MP | ✕ 11 min 27 s VRAM 72G | ✕ 22 min 34 s VRAM 74G | ✕ 32 min 44 s VRAM 75G | ✕ 1.2 h VRAM 79G |
| 1344 × 768 1.0MP · official max | ✕ 18 min 31 s VRAM 73G | ✕ 40 min 15 s VRAM 76G | ✕ 1.0 h VRAM 78G | ✕ 2.3 h VRAM 83G |
| 1376 × 768 1.0MP · above native | ✕ 19 min 13 s VRAM 73G | ✕ 42 min 1 s VRAM 76G | ✕ 1.1 h VRAM 78G | ✕ 2.5 h VRAM 83G |
| 1920 × 1088 2.0MP · above native | ✕ 1.1 h VRAM 78G | ✕ 2.8 h VRAM 84G | ✕ 4.7 h VRAM 88G | ✕ 12.3 h VRAM 95G |
Times are per whole clip (model load and text encoding included); the first run is slower due to kernel compilation. ⚠ = weight offloading / noticeably slower; ✕ = not recommended.
Reading the numbers
Every tier spills to the pagefile with the recommended combo — lower the resolution or step down a quant tier first. 28 high-end combinations are not recommended (pagefile pressure or >90 min per clip) — see the ✕ marks below. Already top-tier: stack 4–8 step distillation with Sage/Kitchen attention; for very long clips try SLA / VSA sparse attention.
Recommended combo (Research tier (96GB+ / multi-GPU))
- Main model: minimax_h3_fl2va_bf16.safetensors(66.28GB)
- Text encoder: qwen3vl_32b_minimax_h3_bf16.safetensors(51.51GB)
- Acceleration: Official baseline (no acceleration) · ~1× sampling
- Launch flags: defaults are fine
For research/training; not recommended for consumer use
FAQ
Can the Apple M4 Max 128GB (unified memory) run MiniMax H3?
Not with the default combo; smaller quantizations (GGUF Q3/Q2) at lower resolutions still work — see the model library and the calculator.
How fast is H3 on the Apple M4 Max 128GB (unified memory)?
Try the 736×416 short-clip tier first.
How much RAM do I need?
At least undefinedGB of system RAM recommended (minimum 128GB plus a undefinedGB pagefile). With 32GB, always enable --fast-disk or weights spill into the pagefile.
How can I make it faster?
Stack step distillation (e.g. Official baseline (no acceleration)), enable SageAttention / Kitchen attention; for long clips try SLA / VSA sparse attention. All of it is switchable in step 2 of the calculator.
Same tier: —
Related: Hardware guide · Acceleration compared · 8GB VRAM setups